• Welcome to the Two Wheeled Texans community! Feel free to hang out and lurk as long as you like. However, we would like to encourage you to register so that you can join the community and use the numerous features on the site. After registering, don't forget to post up an introduction!

Separated A Stebel Horn To Mount

Joined
Oct 12, 2011
Messages
952
Reaction score
11
Location
Haslet,Tx. Norwalk,Ca.
First Name
Joseph
Last Name
Wells III
Tried twice before to mount the Stebel. Its just to big to mount on the Versys 1000 as a full unit. So separated the compressor from the resonator. Fitted a brass fitting got two clamps and some tubing.Mounted the compressor to the stock horn mount and the resonator next to it. The front fairing wouldn't fit so took the stock horn mount off zipped tied the compressor to the lower fairing bracket and the only way to get the fairing on with the resonator was to zip tie it to the compressor so its beneath the compressor....Success. Didn't take any photos of it mounted but what the heck it works and its loud. BTW i broke the excess plastic off the resonator where the compressor was held. Some folks use a dremel i just used some hand tree pruners to cut it off

[ame="https://www.youtube.com/watch?v=VDxGJb42iq8"]Mounted The Stebel Horn - YouTube[/ame]

32283830573_643e8033cb_h.jpg
P1010734 by weljo2001, on Flickr

32283831913_410ad88395_h.jpg
P1010735 by weljo2001, on Flickr

32283832423_b7970339c4_h.jpg
P1010736 by weljo2001, on Flickr

32283832953_b55c61c35c_h.jpg
P1010737 by weljo2001, on Flickr

32283834233_30b801f1a5_h.jpg
P1010738 by weljo2001, on Flickr

32283835243_2d6fe7d6e7_h.jpg
P1010739 by weljo2001, on Flickr

32283836743_5b8eafcdc3_h.jpg
P1010741 by weljo2001, on Flickr
 
Back
Top