Supermoto Conversion for XR650L! Looking for parts

[combsie]

I'm wanting to convert my XR into a supermoto and was wanting to see what parts are laying around everyone's garage. I'm looking for:

CRF forks
RSW triples
Supermoto wheels for the XR
320 mm brake rotor
Aftermarket exhaust

Let me know what you got


Sent from my iPhone using Tapatalk

 

[rz_racer_69]

Would you be interested in a whole bike?
2002 with around 20k miles.
CRF forks with 320 disk & SM rims.
Carb conversion & XR's Only full exhaust.

 

[Gravel Guy]

Would you be interested in a whole bike?
2002 with around 20k miles.
CRF forks with 320 disk & SM rims.
Carb conversion & XR's Only full exhaust.

Sweet bike! Did you also install a cush drive?

 

[combsie]

That is a beautiful bike and exactly what I'm looking to do!! Unfortunately I already have an XR. Unless you want to trade I was looking to convert mine. BTW what triple did you use? Are you using the stock speedo?

Dam that looks good!


Sent from my iPhone using Tapatalk

 

[combsie]

Well I just picked up a CRF450 front end complete with tire and caliper. Real nice set that has an applied triple!


Sent from my iPhone using Tapatalk

 

[combsie]

Sent from my iPhone using Tapatalk

 

[Bagwell]

That does look good.

 

[thebigman]

I have dang near anything you want Sumo Wise , Clamps , 3 or 4 wheelsets , thats complete or parts to put a set together .


PM me and we will get ya going ??

 

[thebigman]

I have a set of wheels with talon hubs , excel hoops that will go right on the L using the stock odo drive . And they are sho purrty .

New set of RSW triples , spanking new fork brace for the stock forks , bar risers ,

I have a new set of silver excel hoops , a set of ss spokes and new or used hubs .

New SS Exhaust from XR's only . Just hollar , we can make a list , then a bigger list , or being I have 3 of these things ,

I'll sell 1 with the crf setup or 1 with the stock setup , it's as easy as chocolate or vanilla .

 

[thebigman]

Still have this set with rubbers on it now ,

Still have this set also .

I've got these hoops for whichever way you wanna go , meaning ,

Front 32 or 36 hole front and a 32 hole rear

Is this 1 of the ways you'd like to go .

Or kinda like this ?

Also , you've gotta be careful with buying warp 9's and there offsets .

They produce 1 or 2 sets that are kinda a 1 set fits all ,

Whenever you see chain rub on a rear tire with a 140 or 150 , no good .

I've had my sets built to make sure of the correct offset and that cures the chain rub with extra room for maybe a 160 to fit , although that size rear tire is a joke on this XRL or XRR application .

 

[thebigman]

I'm wanting to convert my XR into a supermoto and was wanting to see what parts are laying around everyone's garage. I'm looking for:

CRF forks
RSW triples
Supermoto wheels for the XR
320 mm brake rotor
Aftermarket exhaust

Let me know what you got


Sent from my iPhone using Tapatalk

Reading this 1st post as I should have done from the start , I have

everything in the above list , and basically in like new condition .

 

[rz_racer_69]

Sweet bike! Did you also install a cush drive?

Thanks. No cush drive. Had to replace the stock counter shaft sproket with one from an XR650R, as the stock one was eating the shaft.