Swapped out the bars on a 2009 Harley Fat Bob (FXDF model) and had to disassemble the wiring inside the bars in order to remove them. Once we got the new bars on and redid the connections (we took pictures of the wiring before disassembling them) the bike starts up fine, but noticed the speedometer cuts out intermittently, the rear brake light doesn't light up when the level is pulled, the turn signals aren't working, and the hi-beam on the headlamps aren't either.
We quadruple checked the wiring in the connectors and everything is wired up correctly and I can't find any shorts anywhere so we're completely stumped on what this could be.
We have a service manual and some schematics that came with it but I can't make heads and tails of what exactly to look at. Schematic is found here http://i.imgur.com/2LO1xzP.png
We've also checked the fuses on the side of the bike, nothing blown, no wires pinched or anything either.
Quick run down of the issues, I'm sure they are all interconnected somehow but we just can't figure this out.
The headlamp works unless you put it into high beam, then it cuts out.
Speedometer works sometimes but will randomly shut off.
Brake running light is fine but doesn't light up when brake is pulled.
Turn signals don't work when button is pressed.
Anyone got a direction to go?
We quadruple checked the wiring in the connectors and everything is wired up correctly and I can't find any shorts anywhere so we're completely stumped on what this could be.
We have a service manual and some schematics that came with it but I can't make heads and tails of what exactly to look at. Schematic is found here http://i.imgur.com/2LO1xzP.png
We've also checked the fuses on the side of the bike, nothing blown, no wires pinched or anything either.
Quick run down of the issues, I'm sure they are all interconnected somehow but we just can't figure this out.
The headlamp works unless you put it into high beam, then it cuts out.
Speedometer works sometimes but will randomly shut off.
Brake running light is fine but doesn't light up when brake is pulled.
Turn signals don't work when button is pressed.
Anyone got a direction to go?