Yes just the two M6 bolts and the cable..
There is a large diameter O ring that "seals"
the housing to the case.. That gets old and hard and make removal difficult.
Caution DO NOT DO THIS.. Use at your own risk, unintended pregnancy and blindness may occur.
A piece of wood like hunk of 2x4 and a heavy hammer to provide a single shock is often very effective.
BUT you need to drive the starter straight pout, not at an angle of the case can be damaged, and or the starter drive gear shaft bent
There is a large diameter O ring that "seals"
the housing to the case.. That gets old and hard and make removal difficult.
Caution DO NOT DO THIS.. Use at your own risk, unintended pregnancy and blindness may occur.
A piece of wood like hunk of 2x4 and a heavy hammer to provide a single shock is often very effective.
BUT you need to drive the starter straight pout, not at an angle of the case can be damaged, and or the starter drive gear shaft bent
**** that packing tape ...
The hooligan is very hard to start when cold.
The starter sounds like gravel is in the starter housing.
I'm thinking the starter is dragging, pulling massive amps to spin and starving the coil for power.
An ebay replacement was $20.
But I'm having a heckuva time getting the starter out. It's just the 2 bolts and the power cable, right? It's loose and wiggles a bit, but just won't pop out.
Thought I might ask if I'm missing something before i hit it with a hammer ....